How To Clean Sediment Out Of Shower Head

How To Clean A Shower Caput - Top 3 Tips

---

Is your shower caput not performing like it used to? Over time mineral deposits can build up which can cause the nozzles to eject h2o in all directions or clog up completely, leaving you lot with poor water pressure or depression period.

Hither are our meridian tips to help get your shower caput back to meridian performance.

#one Rub the Nozzles

Many shower heads take flexible rubber nozzles. You lot can dislodge mineral buildup in these nozzles by but massaging each nozzle with your finger. You tin also try gently scrubbing the nozzles with a toothbrush.

#2 Soak the Shower Head in Vinegar

In that location are a couple ways to do this:

• If you adopt to get out the shower caput attached to the pipe coming out of the wall, you lot can fill a plastic bag with vinegar and wrap it around the shower head.
  • Secure the purse around the head with a rubber band, record, or a twist tie.
  • Exit the bag around the shower head for a few hours.
  • Remove the bag and plough on the water for a few minutes to clear the vinegar out of the shower caput.
• If you don't mind removing the caput from the shower pipe, you can submerge the shower head in a container full of white vinegar.
  • Let the shower caput soak in the vinegar for a few hours.
  • Re-adhere the shower head to the shower pipage and run water through the head for a few minutes to clear out the vinegar.

#3 Make clean the Filter Screen

To clean the filter screen, you may need to consult the shower head instruction manual. If you didn't keep the manual, don't panic! You tin can usually find it on the website or by contacting the customer service department.

In full general, the filter screen is located in the part of the shower head that connects to the pipage. You lot will need to remove the shower caput from the pipe to get to the filter screen.

In most Waterpik® brand shower heads, the filter screen tin be removed by gently brushing the filter out. Or you can use tweezers/needle-olfactory organ pliers to get the screen out of the pivot ball.

One time the filter screen is out of the pivot ball, run the screen under water for a few minutes to flush out any buildup. You lot can also use a toothbrush to gently castor out mineral deposits.

Identify the filter screen back into the pivot ball and re-install the shower head to the shower pipe.

Important Annotation! Harsh cleaning chemicals may damage your shower head and are not recommended for cleaning.

---

Considering a Replacement Shower Head?

Replacing a shower head is quick, piece of cake and may reduce your energy and water bills.

• Browse Waterpik Shower Heads

Source: https://www.waterpik.com/shower-head/product-support/articles/top-3-tips-for-cleaning-your-shower-head/

Posted by: burnsallasted88.blogspot.com

Share this post